重力坝坝基多斜面抗滑稳定模糊体系可靠度研究

以基岩具有多斜面、多滑移通道的某实际重力坝工程为例,基于刚体极限平衡法,采用模糊理论和几种典型的体系可靠度计算方法,研究其典型坝段的坝基深层抗滑稳定模糊体系可靠度,探讨模糊理论中隶属函数形式、隶属度以及隶属函数中关键参数的取值对可靠度计算结果的影响。研究结果表明,采取限制失效概率模糊界限比的方法可使计算结果更具有参考性,考虑模糊性的抗滑稳定可靠指标的下限较常规可靠度计算值偏小,这在重力坝坝基抗滑稳定分析中应引起重视。     

A first-principles investigation on mechanical and metallic properties of titanium carbides under pressure

The titanium carbides are potential candidates to achieve both high hardness and refractory property. We carried out a structural search for titanium carbides at three pressures of 0 GPa, 30 GPa and 50 GPa. A phase diagram of the Ti-C system at 0 K was obtained by elucidating formation enthalpies as a function of compositions, and their mechanical and metallic properties of titanium carbides were investigated systematically. We also discussed the relation of titanium concentration to the both mechanical and metallic properties of titanium carbides. It has been found that the average valence electron density and tractility improved at higher concentrations of titanium, while the degree of covalent bonding directionality decreased. To this effect, the hardness of titanium carbide decreases as the content of titanium increases. Our results indicated that the titanium content significantly affected the metallic properties of the Ti-C system.     

Stability and thermophysical properties of fly ash nanofluid for heat transfer applications

Improving the performance of heat transfer fluids is altogether significant. The best approach for improving the thermal conductivity is the addition of nanoparticles to the base fluid. In the present study, specific heat, dynamic viscosity, and thermal conductivity of water-based Indian coal fly ash stable nanofluid for 0.1% to 0.5% volume concentration in the temperature range of 30 to 60°C has been investigated. To evaluate an average particle diameter of 11.5 nm, the fly ash nanoparticles were characterized with scanning electron microscopy and dynamic light scattering. Using zeta potential, the stability of nanofluid in the presence of surfactant Triton X-100 was tested. Thermal conductivity and viscosity of fly ash nanofluid increased, while specific heat decreased as volume concentration increased. The effect of temperature on the fly ash nanofluid was directly proportional to its thermal conductivity and specific heat and inversely proportional to viscosity.     

1,5-己二烯交联烯烃聚合物的合成及其抗剪切稳定性

以金属配合物为催化剂、1,5-己二烯为交联剂,采用本体聚合法合成了交联超高相对分子质量烯烃类聚合物(简称交联聚合物)。用傅里叶变换红外光谱、核磁共振、凝胶渗透色潜表征交联聚合物的结构和相对分子质量。用旋转黏度计和超声波仪研究了1,5-己二烯用量对交联聚合物溶液表观黏度的影响及交联聚合物的相对分子质量对交联聚合物溶液抗剪切稳定性的影响。实验结果表明,在最佳聚合条件(单体80mL、助催化剂0．4mL、CS-1催化剂0．090g、1,5-己二烯0．40mL、0℃、24 b)下所合成的交联聚合物的重均相对分子质量为7．7×106,数均相对分子质量3．6×106。加入少量1,5-己二烯能提高交联聚合物的抗剪切能力,同时也能提高交联聚合物的相对分子质量。交联聚合物的相对分子质量越大,抗剪切稳定性越好。1,5-己二烯用量约为0．1 mL时(单体40 mL),交联聚合物溶液的表观黏度达到最大值(16．8 mPa·s)。     

油基钻井液的封堵性能研究与应用

在涠洲12-1北油田一期工程中使用油基钻井液后事故率明显降低,但仍未能彻底解决涠二段硬脆性泥页岩井壁稳定性问题。对进一步加强油基钻井液的封堵能力进行了室内研究。通过在油基钻井液中引入超微细颗粒材料、纤维材料、变形材料和粘弹性材料,可大幅度提高其封堵能力。在涠洲12-1北油田二期工程中应用了加强封堵能力的油基钻井液,结果钻井施工非常顺利,几乎无井下复杂事故。室内评价及二期工程实践结果表明,增强油基钻井液的封堵能力对保持硬脆性泥页岩井壁稳定至关重要。     

甲烷水合物热稳定性的研究

研究了在阴离子表面活性剂十二烷基硫酸钠(SDS)体系中甲烷水合物在冰点以下的常压分解规律。研究结果表明,静态下生成的甲烷水合物较动态下的分解速度低;在262·15~268·15K在之间,甲烷水合物的分解速度随着温度的降低而升高;在此范围以外,甲烷水合物的分解速度随着温度的降低而降低;在262·15~272·15K之间存在最低分解速度,其中在268·15K,甲烷水合物的分解速度最低。利用外推法计算268·15K时甲烷水合物完全分解需要25d,说明水合物的自我保存性质对气体水合物储运技术具有重要意义。     

控制爆破切槽放顶处理空区技术探讨

文中筒要讨论了国内外黄金矿山采空区处理的几种方法。在对金风公司采空区综合评价与应力测试基础上．提出了控制爆破切槽放顶处理采空区的新技术，并详细介绍了新技术要点及实施细节。应用实践表明，该技术简便易行、经济安全、具有创新性。     

Annealing effects on structural and electrical properties of fluorinated amorphous carbon films deposited by plasma enhanced chemical vapor deposition

The annealing effects on the structural and electrical properties of fluorinated amorphous carbon (a-C:F) thin films prepared from C₆F₆ and Ar plasma are investigated in a N₂ environment at 200 mTorr. The a-C:F films deposited at room temperature are thermally stable up to 250 °C, but as the annealing temperature is increased beyond 300 °C, the fluorine incorporation in the film is reduced, and the degree of crosslinking and graphitization in the film appears to be enhanced. At the annealing temperature of 250 °C, the chemical bond structures of the film are unchanged noticeably, but the interface trapped charges between the film and the silicon substrate are reduced significantly. The increased annealing temperature contributes the decrease of both the interface charges and the effective charge density in the a-C:F film. Higher self-bias voltage is shown to reduce the charge density in the film.     

铌和钨对γ-TiAl基合金热稳定性的影响

采用光学显微镜(OM)，扫描电镜(SEM)，X射线衍射研究了TiAl—5Nb，TiAl—14．3Nb，TiAl—8Nb—1W，TiAl—12．3Nb-2W四种合金片层组织在1000℃的热稳定性。结果表明，TiAl—12．3Nb-2W合金热稳定性最好，但合金元素对TiAl基合金热稳定性的影响机理还有待进一步的研究。     

低水分抗热震高铝可塑料在加热炉上的应用

用矾土作为主原料,选择适当结合剂和添加剂,引入微粉技术,采用真空炼泥等工艺手段,研制成低水分抗热震高铝可塑料。该制品用作热媒加热炉衬里,显示出良好的耐高温和耐热冲击性能。